The Miles M.9 Kestrel was a 1930s British single-engined tandem seat monoplane, intended as an advanced trainer. Only one Kestrel was built but it was developed into the Miles Master for the RAF and produced in large numbers at the start of the Second World War.
The Kestrel had thick wings, perhaps influenced by the experiments with the Miles Hawcon, with a root thickness to chord ratio of about 23%. They had inverted gull form, with anhedral inboard, giving way to dihedral on the outer part. The wings carried ailerons immediately outboard of Miles split trailing edge flaps in two sections on each wing. The main Landing gear was attached at the lowest point of the wing, keeping the legs short; they retracted backwards, with the wheels rotating into the plane of the wings. A tail wheel was fitted. Both rudder and elevators were horn balanced and fitted with .
The aircraft was wooden throughout, with spruce frames covered in beech plywood and a doped fabric sheath. Instructor and pupil sat in tandem under a simple perspex canopy, with the minimum of framing and with extra clear panels in the fuselage sides behind the rear seat. The forward seat was positioned at about mid-chord. The 745 hp (556 kW) Kestrel engine drove a three-bladed propeller and had a chin radiator under the nose.
After the Hendon event, it flew on manufacturer's trials, under B conditions (in Class B markings) as U-5, until it was transferred to military markings as N3300. It was test flown at the Royal Aircraft Establishment at Farnborough, and by the Aeroplane & Armament Experimental Establishment at Boscombe Down. On 20 August 1941, it was struck off RAF charge, and in 1943 was scrapped at the Miles base at Woodley Aerodrome.
The Kestrel had not been built to an Air Ministry specification, and did not immediately go into production, being described by some as "premature". However, in 1938, the de Havilland Don, that had won the Air Ministry specification T.6/36 contract, proved unsuitable in service, so orders were placed for a production development of the Kestrel called the Miles Master. At the time, it was the largest ever order for an RAF training aircraft. The Master I had some noticeable differences from the Kestrel, such as in the shape of the rear fuselage and fin, the rudder and elevator balancing, the cockpit glazing, and the relocation of the radiator from nose to belly, but was otherwise very similar.
Operational history
Specifications
Notes
Bibliography
External links
|
|